The Buffalo LinkStation LS-421 Diskless NAS represents a small departure from the norm for Buffalo in that this is the first consumer-oriented unit to be offered as an enclosure without drives. While replacing drives in the previous generation of LinkStations was easy, it’s good to see this being offered as an option from the start. GNC has reviewed several Buffalo units in the past and many have been no slouch in the speed department. The LS-421 features the new generation Marvell ARMADA 370, 1.2GHz ARMv7 CPU core and DDR3 512MB RAM so let’s see if it stands up to the claims of ”up to 80 MB/s” .
From the outside, the LS-421 hasn’t significantly changed since the previous version with a slightly front rounded surface. The previous iteration of the product had blue LEDs on a black fascia; this time it’s white LEDs on silvery-grey which looks good when they’re flickering away. Overall, it’s not going to win any design awards, but it’s not going to offend either. There are two USB ports, a USB 3 one on the front and a USB 2 on the rear. These can be used for additional storage or printers.
Installing the disks is straightforward, needing only a screwdriver to screen the hard drives into plastic frames which then guide the drives into place in the NAS. The front of the unit simply pops on and off. Once the two drives are in place, the network cable can be connected and the power plugged in. For those interested, it’s an external PSU.
On power-up for the first time, there’s about ten minutes of activity while the LS-421 sorts itself out. While that’s happening, the supplied Buffalo NAS Navigator 2 software can be installed on the PC or laptop. It’s much improved over the previous version, but it’s not essential software as the NAS is largely configured via a web client. However, it is useful for troubleshooting and finding the IP address of the LS-421 for the first time.
Those used to the old tabbed style of web interface will discover that Buffalo has gone all Metro with a tile-based UI, albeit without the Microsoft colours. All the usual configuration features are present and correct – disk format, share administration, users, groups, RAID 0 / 1 and so on. Buffalo also gets brownie points for prompting to change the administrator password whenever the web client starts.
The LS-421 isn’t only a network NAS, as it has Bittorrent and DLNA services built-in. Having a NAS-based Bittorrent client is useful as you don’t need to leave your PC on for large downloads and once downloaded, the server with contribute back to others downloading the same file. The DLNA server worked fine too, letting me play mp3s via the Roku.
Apps are available for iOS and Android to access files on smartphones and tablets, and it’s possible to configure access to the NAS across the Internet so that you can upload and download files while out and about. Obviously the speed is going to be limited by the network or broadband connection but it’s a useful to have the facility in case you need it.
With all of that out the way, how fast is it? I tested using Totusoft’s LAN Speed Test from a fairly old laptop running Windows 8.1 and also with dd and bonnie++ from a newer SuSE 12.1 Linux desktop. All tests were run at least three times and both computers were connected into the same gigabit switch that the LS-421 was connected into.
From the laptop, LAN Speed Test gave an average over a couple of a runs around 33 MB/s for writes and 22.5 MB/s.
On the desktop, dd gave a write speed of 63 MB/s, and bonnie++ wrote at 45 MB/s and read at 68 MB/s. Remember these figures reflect the performance of the LS-421 in my environment and YMMV as they say. Certainly, the bonnie++ read of 68 MB/s isn’t very far away from Buffalo’s claims of 80 MB/s.
Overall, the LS-421 is a tidy NAS unit and with an online price of GB£85 (without drives), it’s definitely one of the cheaper NAS enclosures. It’s nippy and with a total capacity potential of 8 TB, it can grow as your needs require.
Thanks to Buffalo for the loan of the review unit.